[T3] Caliper bolt locking plate

Dave Hall dave at hallvw.clara.co.uk
Thu Oct 10 01:49:41 PDT 2013


They wouldn't be part of a Type 3 pad kit as there is no need to remove the
caliper.

Dave
UK VW Type 3&4 Club
===================

-----Original Message-----
From: type3-vwtype3.org-bounces at lists.vwtype3.org
[mailto:type3-vwtype3.org-bounces at lists.vwtype3.org] On Behalf Of Joe
Plowick III
Sent: 10 October 2013 04:10
To: type3 at vwtype3.org
Subject: Re: [T3] Caliper bolt locking plate

I've never had a brake kit come with replacement caliper bolts, for any of
my cars.  I purchased some new bolts for the calipers (non-VW but the proper
grade), but I don't think they have the ridges under the bolt head.
 So I could pick up some lock washers to use.  But most replacement bolts
that I order for my GTI do come with the dry blue threadlocker compound
already on them.

Joe P.
'69 Type 3 Squareback

On Wed, Oct 9, 2013 at 6:51 PM, Dave Hall <dave at hallvw.clara.co.uk> wrote:

> I have a feeling I have seen a Type 3 workshop bulletin about caliper 
> bolts that said the ones now supplied (with caliper overhaul kits?) 
> are 1mm shorter and have locking ridges on the heads, and the plates 
> are no longer used.  I don't entirely trust my memory any more (!), 
> but if I get a free moment, I'll see if I can find it again.
>
> ISTR the newer VWs have new bolts in the pad kits with a coating of 
> blue-coloured paste - presumably some grade of locking compound - and 
> locking ridges on the underside of the heads.  You have to remove the 
> caliper to fit those pads anyway, which is why they come in the pad kit.
>
> Dave
> UK VW Type 3&4 Club
> ===================
>
> -----Original Message-----
> From: type3-vwtype3.org-bounces at lists.vwtype3.org
> [mailto:type3-vwtype3.org-bounces at lists.vwtype3.org] On Behalf Of Joe 
> Plowick III
> Sent: 09 October 2013 22:48
> To: type3 at vwtype3.org
> Subject: Re: [T3] Caliper bolt locking plate
>
> Thanks for the info.  I wasn't sure how critical they were, and wanted 
> to double-check.  I guess if my GTI doesn't use anything like this, 
> then my Square should be fine too.  :)
>
> Joe Plowick
> '69 Type 3 Squareback
>
>
> On Wed, Oct 9, 2013 at 4:28 PM, Jim Adney <jadney at vwtype3.org> wrote:
>
> > On 9 Oct 2013 at 15:15, Joe Plowick III wrote:
> >
> > > Where is the best place to pick up the caliper bolt locking plate 
> > > for
> > late
> > > model calipers (3 in bolt spacing)?  Or is there something better 
> > > to
> use?
> >
> > I haven't found any source for them. I've considered having 
> > something made, but don't know how much that might cost. A LOT of 
> > our cars are running around without these, and seem to do just fine 
> > as long as you torque the bolts to spec.
> >
> > --
> > *******************************
> > Jim Adney, jadney at vwtype3.org
> > Madison, Wisconsin, USA
> > *******************************
> >
> > _______________________________________________
> > VWType3.Org mailing list - type3 at vwtype3.org 
> > http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
> > Contact gregm at vwtype3.org if you need help with the list.
> >
> -------------- next part -------------- An HTML attachment was 
> scrubbed...
> URL:
> <
> http://lists.vwtype3.org/pipermail/type3-vwtype3.org/attachments/20131
> 009/4
> 3c5c329/attachment.htm>
> _______________________________________________
> VWType3.Org mailing list - type3 at vwtype3.org 
> http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
> Contact gregm at vwtype3.org if you need help with the list.
>
> _______________________________________________
> VWType3.Org mailing list - type3 at vwtype3.org 
> http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
> Contact gregm at vwtype3.org if you need help with the list.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.vwtype3.org/pipermail/type3-vwtype3.org/attachments/20131009/7
bd9d361/attachment.htm>
_______________________________________________
VWType3.Org mailing list - type3 at vwtype3.org
http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
Contact gregm at vwtype3.org if you need help with the list.




More information about the type3-vwtype3.org mailing list