[T3] Vent windows seals
Robert Klein
rabioklein at aol.com
Fri Sep 6 12:48:15 PDT 2013
I've stripped a door down to nothing a long time ago. If I remember correctly there is a nut under the pivot location and once that is removed is comes out easy.
Sent from the desk of Robert Klein
On Sep 6, 2013, at 11:48 AM, "Dennis Stiefel" <dlstiefel at dekalbk12.org> wrote:
> We finally got the doors in from the body class today and have the doors on
> the car now. We now have the daunting task of putting all these new seals
> on the doors and door glass that we got from ISP about a year and a half
> ago. We are having an issue with figuring out how to put the longer seal on
> the vent window. It looks like they are only 2 ways to get it on. Either
> cut the seal where the glass pivots at the bottom or remove the glass out of
> the frame. I like the latter option better but how do take the glass out?
> The only way I see is to drill out some rivets at the top hinge and then
> where do you get some rivets like that to replace them. Just wanted to run
> this by everyone before we cut or drilled out something first.
>
>
>
> Dennis Stiefel
>
>
>
> 72 Fastback FI MT
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://lists.vwtype3.org/pipermail/type3-vwtype3.org/attachments/20130906/a3606f1e/attachment.htm>
> _______________________________________________
> VWType3.Org mailing list - type3 at vwtype3.org
> http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
> Contact gregm at vwtype3.org if you need help with the list.
More information about the type3-vwtype3.org
mailing list