[T3] While the engine is out ...

[Jim Adney]

On 2 Jan 2014 at 10:25, Jacob Adam Schroeder wrote:

> So I'm going to take the collective advice and pull my engine to install
> the thermostat / flaps / linkage.  I'm currently trying to secure the parts
> needed (right now, I only have a thermostat and a jammed set of flaps).

You also need all the thermostat linkage and the thermostat mounting 
bracket.

> Should I try to get my original type 3 heads ready to swap on in
> place of the generic type 1 heads (with drilled FI temp sensor) that I'm
> currently running?

Since you already have a question about what's going on with those 
heads, this would be a good time to get your OG heads freshened up 
and ready to install. I'd just go ahead and put them in. You won't 
know until the Mofoco head are out what your current problem, if any, 
really is, but it would be a shame to do all this work and then 
decide that you really needed head work.  

Look at this as an opportunity.


-- 
*******************************
Jim Adney, jadney at vwtype3.org
Madison, Wisconsin, USA
*******************************