[T3] type3-vwtype3.org Digest, Vol 60, Issue 21
Ross Clarke
clarkeross28 at internode.on.net
Sat Sep 19 22:44:13 PDT 2015
Hello all,
I've fitted 009 distributors to my 1966 type 3 and also to my 1303 76 Karmann. I must say the results were very good. Also these 009's have both electronic ignition as I tour a lot in both cars.
I have heard the newer 009's can be of average manufacture! Guess we have all experience these after market parts at sometime!
I have made sure all the cars wiring is in good condition as faulty old electrics causes many headaches, distributors being blamed! I've had carbs rebuilt on both cars another important running factor on older much used VWs.
My 66 fastback has been converted to 12 volt. This conversion being done before my purchase. No machine marks are on the internal 6 vollt swing axle bell housing. All seems to run well with 12 volt!
Regards,
Ross (Australia)
Ross Clarke
Sent from my iPad
> On 20 Sep 2015, at 4:36 AM, type3-vwtype3.org-request at lists.vwtype3.org wrote:
>
> Send type3-vwtype3.org mailing list submissions to
> type3-vwtype3.org at lists.vwtype3.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
> or, via email, send a message with subject or body 'help' to
> type3-vwtype3.org-request at lists.vwtype3.org
>
> You can reach the person managing the list at
> type3-vwtype3.org-owner at lists.vwtype3.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of type3-vwtype3.org digest..."
>
>
> _______________________________________________
> VWType3.Org mailing list - type3 at vwtype3.org
> To unsubscribe or change subscription options, visit:
> http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
> If you need more help, contact: gregm at vwtype3.org
> _______________________________________________
>
>
>
> Today's Topics:
>
> 1. Flywheel Question (Craigs List)
> 2. Re: 009 questions (Keith Park)
> 3. Re: 009 questions (B Fye)
> 4. Re: Flywheel Question (Jim Adney)
> 5. Re: Flywheel Question (Craigs List)
> 6. Re: Flywheel Question (Craigs List)
> 7. Re: Flywheel Question (Daniel K. Du Vall)
> 8. Re: Flywheel Question (Craigs List)
> 9. Re: Flywheel Question (Daniel K. Du Vall)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Sat, 19 Sep 2015 19:26:34 -0500
> From: Craigs List <craigslistcsprings at gmail.com>
> To: Type 3 List <type3 at vwtype3.org>
> Subject: [T3] Flywheel Question
> Message-ID:
> <CAF3AfUZuQaZVbeLv=Wwz2aGWCr2kGSDAWUGOhBtO4rKDD4RnHQ at mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> Looks like the flywheel that came on my rebuilt long block is 1/8" bigger
> than the one that was on it. Is that 12v flywheel vs. 6v flywheel
> difference?
>
> One on the old engine is marked 6v and measures 10 3/4". One on the engine
> measures 10 7/8".
>
> Should I swap flywheels? Is there room for 1/8"? What about the starter?
> Will it work with either or will I need a different starter to go with the
> bigger flywheel?
>
> Added some pictures top my samba gallery for those interested.
>
> http://www.thesamba.com/vw/forum/album_search.php?search_author=one4house
>
> Adam
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://lists.vwtype3.org/pipermail/type3-vwtype3.org/attachments/20150919/752ef5a8/attachment.htm>
>
> ------------------------------
>
> Message: 2
> Date: Sat, 19 Sep 2015 20:32:00 -0400
> From: "Keith Park" <topnotch at nycap.rr.com>
> To: <type3 at vwtype3.org>
> Subject: Re: [T3] 009 questions
> Message-ID: <B5.0A.14681.08EFDF55 at cdptpa-oedge01>
> Content-Type: text/plain; charset="us-ascii"
>
> the 009 is about the worst choice you can use, what carb setup are yu using?
> match the dist to that or if stock use the correct one,
>
> keith
>
> -----Original Message-----
> From: type3-vwtype3.org [mailto:type3-vwtype3.org-bounces at lists.vwtype3.org]
> On Behalf Of Ray Gifford
> Sent: Friday, September 18, 2015 2:41 PM
> To: type3 at vwtype3.org
> Subject: [T3] 009 questions
>
> I want to put a 009 in my notch. Do o need a special one, I picked one up
> but it is taller than the distro that is in now and the cap is shorter than
> the standard 009 cap. Do I need to get a thing special or will it actually
> fit under the cover?
>
> Ray
> _______________________________________________
> VWType3.Org mailing list - type3 at vwtype3.org
> To unsubscribe or change subscription options, visit:
> http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
> If you need more help, contact: gregm at vwtype3.org
>
>
>
> ------------------------------
>
> Message: 3
> Date: Sat, 19 Sep 2015 17:34:01 -0700
> From: B Fye <vwfye311 at gmail.com>
> To: type3 at vwtype3.org
> Subject: Re: [T3] 009 questions
> Message-ID:
> <CAF71T9hkhuMhu_EbZwS65XKnEMZR+VUOZG=XkXbU7Ttm1aB1Hw at mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> Keith, you have said this for years. My engines (all but a stock
> singleport single carb 1300) have rub the German 009 w/o issue. Either
> performance or endurance...
> Real life Trump's theory.
>
> Brian
>> On Sep 19, 2015 5:32 PM, "Keith Park" <topnotch at nycap.rr.com> wrote:
>>
>> the 009 is about the worst choice you can use, what carb setup are yu
>> using?
>> match the dist to that or if stock use the correct one,
>>
>> keith
>>
>> -----Original Message-----
>> From: type3-vwtype3.org [mailto:
>> type3-vwtype3.org-bounces at lists.vwtype3.org]
>> On Behalf Of Ray Gifford
>> Sent: Friday, September 18, 2015 2:41 PM
>> To: type3 at vwtype3.org
>> Subject: [T3] 009 questions
>>
>> I want to put a 009 in my notch. Do o need a special one, I picked one up
>> but it is taller than the distro that is in now and the cap is shorter than
>> the standard 009 cap. Do I need to get a thing special or will it actually
>> fit under the cover?
>>
>> Ray
>> _______________________________________________
>> VWType3.Org mailing list - type3 at vwtype3.org
>> To unsubscribe or change subscription options, visit:
>> http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
>> If you need more help, contact: gregm at vwtype3.org
>>
>> _______________________________________________
>> VWType3.Org mailing list - type3 at vwtype3.org
>> To unsubscribe or change subscription options, visit:
>> http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
>> If you need more help, contact: gregm at vwtype3.org
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://lists.vwtype3.org/pipermail/type3-vwtype3.org/attachments/20150919/a1e57687/attachment.htm>
>
> ------------------------------
>
> Message: 4
> Date: Sat, 19 Sep 2015 20:41:54 -0500
> From: "Jim Adney" <jadney at vwtype3.org>
> To: type3 at vwtype3.org
> Subject: Re: [T3] Flywheel Question
> Message-ID: <55FE0EE2.29526.11FECF at jadney.vwtype3.org>
> Content-Type: text/plain; charset=US-ASCII
>
> The 12 V flywheel is slightly larger in diameter. It also has a
> completely different number of teeth. It requires a different
> starter. The 12 V starter has a drive pinion with a different number
> of teeth; it also has a slightly different diameter armature shaft.
>
> The way the flywheels mount to the crank also varies. Sometimes they
> can be interchanged, but it's not a good option, since it's not a
> very good match.
>
>> On 19 Sep 2015 at 19:26, Craigs List wrote:
>>
>> Looks like the flywheel that came on my rebuilt long block is 1/8" bigger
>> than the one that was on it. Is that 12v flywheel vs. 6v flywheel
>> difference?
>>
>> One on the old engine is marked 6v and measures 10 3/4". One on the engine
>> measures 10 7/8".
>>
>> Should I swap flywheels? Is there room for 1/8"? What about the starter?
>> Will it work with either or will I need a different starter to go with the
>> bigger flywheel?
>>
>> Added some pictures top my samba gallery for those interested.
>>
>> http://www.thesamba.com/vw/forum/album_search.php?search_author=one4house
>>
>> Adam
>> -------------- next part --------------
>> An HTML attachment was scrubbed...
>> URL: <http://lists.vwtype3.org/pipermail/type3-vwtype3.org/attachments/20150919/752ef5a8/attachment.htm>
>> _______________________________________________
>> VWType3.Org mailing list - type3 at vwtype3.org
>> To unsubscribe or change subscription options, visit:
>> http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
>> If you need more help, contact: gregm at vwtype3.org
>>
>>
>> -----
>> No virus found in this message.
>> Checked by AVG - www.avg.com
>> Version: 2015.0.6140 / Virus Database: 4419/10667 - Release Date: 09/19/15
>
>
> --
> *******************************
> Jim Adney, jadney at vwtype3.org
> Madison, Wisconsin, USA
> *******************************
>
>
>
> ------------------------------
>
> Message: 5
> Date: Sat, 19 Sep 2015 21:01:29 -0500
> From: Craigs List <craigslistcsprings at gmail.com>
> To: Type 3 List <type3 at vwtype3.org>
> Subject: Re: [T3] Flywheel Question
> Message-ID:
> <CAF3AfUa0RBKZnpyoq_sG-vZOAXVfiwHZRZPpKky-2iBrcfg5Cw at mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> So it looks like I need a 12v starter and I need to do some clearancing on
> the bell housing.
>
> I found a picture of someone that had to clearance the bottom of the bell
> housing. Is this the standard area that needs to be ground down?
>
> Adam
>> On Sep 19, 2015 8:42 PM, "Jim Adney" <jadney at vwtype3.org> wrote:
>>
>> The 12 V flywheel is slightly larger in diameter. It also has a
>> completely different number of teeth. It requires a different
>> starter. The 12 V starter has a drive pinion with a different number
>> of teeth; it also has a slightly different diameter armature shaft.
>>
>> The way the flywheels mount to the crank also varies. Sometimes they
>> can be interchanged, but it's not a good option, since it's not a
>> very good match.
>>
>>> On 19 Sep 2015 at 19:26, Craigs List wrote:
>>>
>>> Looks like the flywheel that came on my rebuilt long block is 1/8" bigger
>>> than the one that was on it. Is that 12v flywheel vs. 6v flywheel
>>> difference?
>>>
>>> One on the old engine is marked 6v and measures 10 3/4". One on the
>> engine
>>> measures 10 7/8".
>>>
>>> Should I swap flywheels? Is there room for 1/8"? What about the starter?
>>> Will it work with either or will I need a different starter to go with
>> the
>>> bigger flywheel?
>>>
>>> Added some pictures top my samba gallery for those interested.
>> http://www.thesamba.com/vw/forum/album_search.php?search_author=one4house
>>>
>>> Adam
>>> -------------- next part --------------
>>> An HTML attachment was scrubbed...
>>> URL: <
>> http://lists.vwtype3.org/pipermail/type3-vwtype3.org/attachments/20150919/752ef5a8/attachment.htm
>>>
>>> _______________________________________________
>>> VWType3.Org mailing list - type3 at vwtype3.org
>>> To unsubscribe or change subscription options, visit:
>>> http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
>>> If you need more help, contact: gregm at vwtype3.org
>>>
>>>
>>> -----
>>> No virus found in this message.
>>> Checked by AVG - www.avg.com
>>> Version: 2015.0.6140 / Virus Database: 4419/10667 - Release Date:
>> 09/19/15
>>
>>
>> --
>> *******************************
>> Jim Adney, jadney at vwtype3.org
>> Madison, Wisconsin, USA
>> *******************************
>>
>> _______________________________________________
>> VWType3.Org mailing list - type3 at vwtype3.org
>> To unsubscribe or change subscription options, visit:
>> http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
>> If you need more help, contact: gregm at vwtype3.org
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://lists.vwtype3.org/pipermail/type3-vwtype3.org/attachments/20150919/e95eec9f/attachment.htm>
>
> ------------------------------
>
> Message: 6
> Date: Sat, 19 Sep 2015 21:12:19 -0500
> From: Craigs List <craigslistcsprings at gmail.com>
> To: Type 3 List <type3 at vwtype3.org>
> Subject: Re: [T3] Flywheel Question
> Message-ID:
> <CAF3AfUYB5vgMxre9Loe0-dz7tf5EBNf_L2v2V_sLUGTqL2tPtw at mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> I already found a 12v starter. Now if I can get some pointers on the
> clearancing, I'll be set.
>
> Adam
>> On Sep 19, 2015 8:42 PM, "Jim Adney" <jadney at vwtype3.org> wrote:
>>
>> The 12 V flywheel is slightly larger in diameter. It also has a
>> completely different number of teeth. It requires a different
>> starter. The 12 V starter has a drive pinion with a different number
>> of teeth; it also has a slightly different diameter armature shaft.
>>
>> The way the flywheels mount to the crank also varies. Sometimes they
>> can be interchanged, but it's not a good option, since it's not a
>> very good match.
>>
>>> On 19 Sep 2015 at 19:26, Craigs List wrote:
>>>
>>> Looks like the flywheel that came on my rebuilt long block is 1/8" bigger
>>> than the one that was on it. Is that 12v flywheel vs. 6v flywheel
>>> difference?
>>>
>>> One on the old engine is marked 6v and measures 10 3/4". One on the
>> engine
>>> measures 10 7/8".
>>>
>>> Should I swap flywheels? Is there room for 1/8"? What about the starter?
>>> Will it work with either or will I need a different starter to go with
>> the
>>> bigger flywheel?
>>>
>>> Added some pictures top my samba gallery for those interested.
>> http://www.thesamba.com/vw/forum/album_search.php?search_author=one4house
>>>
>>> Adam
>>> -------------- next part --------------
>>> An HTML attachment was scrubbed...
>>> URL: <
>> http://lists.vwtype3.org/pipermail/type3-vwtype3.org/attachments/20150919/752ef5a8/attachment.htm
>>>
>>> _______________________________________________
>>> VWType3.Org mailing list - type3 at vwtype3.org
>>> To unsubscribe or change subscription options, visit:
>>> http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
>>> If you need more help, contact: gregm at vwtype3.org
>>>
>>>
>>> -----
>>> No virus found in this message.
>>> Checked by AVG - www.avg.com
>>> Version: 2015.0.6140 / Virus Database: 4419/10667 - Release Date:
>> 09/19/15
>>
>>
>> --
>> *******************************
>> Jim Adney, jadney at vwtype3.org
>> Madison, Wisconsin, USA
>> *******************************
>>
>> _______________________________________________
>> VWType3.Org mailing list - type3 at vwtype3.org
>> To unsubscribe or change subscription options, visit:
>> http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
>> If you need more help, contact: gregm at vwtype3.org
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://lists.vwtype3.org/pipermail/type3-vwtype3.org/attachments/20150919/f44de408/attachment.htm>
>
> ------------------------------
>
> Message: 7
> Date: Sun, 20 Sep 2015 02:26:05 +0000
> From: "Daniel K. Du Vall" <dduvall at 1peter4-10.org>
> To: "type3 at vwtype3.org" <type3 at vwtype3.org>
> Subject: Re: [T3] Flywheel Question
> Message-ID:
> <BY2PR0501MB1719773C0A0473D5B3E0002B93470 at BY2PR0501MB1719.namprd05.prod.outlook.com>
>
> Content-Type: text/plain; charset="us-ascii"
>
> Did you mention that it had a freeway flyer trans in it?
> If so it might already have clearance for a 12v flywheel.
> But I am just guessing.
> It's been a long while since I have seen a 6V trans and I do remember them machining out the bell housing to fit 12V in them but the freeway flyer might have started out as a 12v trans.
>
> Daniel Du Vall
> http://1peter4-10.org
> http://volkswageninsanity.us
>
> -----Original Message-----
> From: type3-vwtype3.org [mailto:type3-vwtype3.org-bounces at lists.vwtype3.org] On Behalf Of Craigs List
> Sent: Saturday, September 19, 2015 9:12 PM
> To: Type 3 List <type3 at vwtype3.org>
> Subject: Re: [T3] Flywheel Question
>
> I already found a 12v starter. Now if I can get some pointers on the clearancing, I'll be set.
>
> Adam
>> On Sep 19, 2015 8:42 PM, "Jim Adney" <jadney at vwtype3.org> wrote:
>>
>> The 12 V flywheel is slightly larger in diameter. It also has a
>> completely different number of teeth. It requires a different starter.
>> The 12 V starter has a drive pinion with a different number of teeth;
>> it also has a slightly different diameter armature shaft.
>>
>> The way the flywheels mount to the crank also varies. Sometimes they
>> can be interchanged, but it's not a good option, since it's not a very
>> good match.
>>
>>> On 19 Sep 2015 at 19:26, Craigs List wrote:
>>>
>>> Looks like the flywheel that came on my rebuilt long block is 1/8"
>>> bigger than the one that was on it. Is that 12v flywheel vs. 6v
>>> flywheel difference?
>>>
>>> One on the old engine is marked 6v and measures 10 3/4". One on the
>> engine
>>> measures 10 7/8".
>>>
>>> Should I swap flywheels? Is there room for 1/8"? What about the starter?
>>> Will it work with either or will I need a different starter to go
>>> with
>> the
>>> bigger flywheel?
>>>
>>> Added some pictures top my samba gallery for those interested.
>> http://www.thesamba.com/vw/forum/album_search.php?search_author=one4ho
>> use
>>>
>>> Adam
>>> -------------- next part -------------- An HTML attachment was
>>> scrubbed...
>>> URL: <
>> http://lists.vwtype3.org/pipermail/type3-vwtype3.org/attachments/20150
>> 919/752ef5a8/attachment.htm
>>>
>>> _______________________________________________
>>> VWType3.Org mailing list - type3 at vwtype3.org To unsubscribe or
>>> change subscription options, visit:
>>> http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
>>> If you need more help, contact: gregm at vwtype3.org
>>>
>>>
>>> -----
>>> No virus found in this message.
>>> Checked by AVG - www.avg.com
>>> Version: 2015.0.6140 / Virus Database: 4419/10667 - Release Date:
>> 09/19/15
>>
>>
>> --
>> *******************************
>> Jim Adney, jadney at vwtype3.org
>> Madison, Wisconsin, USA
>> *******************************
>>
>> _______________________________________________
>> VWType3.Org mailing list - type3 at vwtype3.org To unsubscribe or change
>> subscription options, visit:
>> http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
>> If you need more help, contact: gregm at vwtype3.org
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://lists.vwtype3.org/pipermail/type3-vwtype3.org/attachments/20150919/f44de408/attachment.htm>
> _______________________________________________
> VWType3.Org mailing list - type3 at vwtype3.org To unsubscribe or change subscription options, visit:
> http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
> If you need more help, contact: gregm at vwtype3.org
>
>
> ------------------------------
>
> Message: 8
> Date: Sat, 19 Sep 2015 21:30:12 -0500
> From: Craigs List <craigslistcsprings at gmail.com>
> To: Type 3 List <type3 at vwtype3.org>
> Subject: Re: [T3] Flywheel Question
> Message-ID:
> <CAF3AfUbpH0K8truXSdFgpUVUrq8qRUnZ2vf1EnS_h==oSxGQVA at mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> It does have a freeway flyer, but I think it was rebuilt by someone local
> to the Killeen area. I really have no history on the transmission other
> than partial information and guessing.
>
> If I get the numbers off the transmission tomorrow, could that help us
> figure out of it is already a later tranny? Or were all swing axle
> transmissions 6v? It is time for me to learn something tonight.
>
> Adam
>> On Sep 19, 2015 9:26 PM, "Daniel K. Du Vall" <dduvall at 1peter4-10.org> wrote:
>>
>> Did you mention that it had a freeway flyer trans in it?
>> If so it might already have clearance for a 12v flywheel.
>> But I am just guessing.
>> It's been a long while since I have seen a 6V trans and I do remember them
>> machining out the bell housing to fit 12V in them but the freeway flyer
>> might have started out as a 12v trans.
>>
>> Daniel Du Vall
>> http://1peter4-10.org
>> http://volkswageninsanity.us
>>
>> -----Original Message-----
>> From: type3-vwtype3.org [mailto:
>> type3-vwtype3.org-bounces at lists.vwtype3.org] On Behalf Of Craigs List
>> Sent: Saturday, September 19, 2015 9:12 PM
>> To: Type 3 List <type3 at vwtype3.org>
>> Subject: Re: [T3] Flywheel Question
>>
>> I already found a 12v starter. Now if I can get some pointers on the
>> clearancing, I'll be set.
>>
>> Adam
>>> On Sep 19, 2015 8:42 PM, "Jim Adney" <jadney at vwtype3.org> wrote:
>>>
>>> The 12 V flywheel is slightly larger in diameter. It also has a
>>> completely different number of teeth. It requires a different starter.
>>> The 12 V starter has a drive pinion with a different number of teeth;
>>> it also has a slightly different diameter armature shaft.
>>>
>>> The way the flywheels mount to the crank also varies. Sometimes they
>>> can be interchanged, but it's not a good option, since it's not a very
>>> good match.
>>>
>>>> On 19 Sep 2015 at 19:26, Craigs List wrote:
>>>>
>>>> Looks like the flywheel that came on my rebuilt long block is 1/8"
>>>> bigger than the one that was on it. Is that 12v flywheel vs. 6v
>>>> flywheel difference?
>>>>
>>>> One on the old engine is marked 6v and measures 10 3/4". One on the
>>> engine
>>>> measures 10 7/8".
>>>>
>>>> Should I swap flywheels? Is there room for 1/8"? What about the
>> starter?
>>>> Will it work with either or will I need a different starter to go
>>>> with
>>> the
>>>> bigger flywheel?
>>>>
>>>> Added some pictures top my samba gallery for those interested.
>>> http://www.thesamba.com/vw/forum/album_search.php?search_author=one4ho
>>> use
>>>>
>>>> Adam
>>>> -------------- next part -------------- An HTML attachment was
>>>> scrubbed...
>>>> URL: <
>>> http://lists.vwtype3.org/pipermail/type3-vwtype3.org/attachments/20150
>>> 919/752ef5a8/attachment.htm
>>>>
>>>> _______________________________________________
>>>> VWType3.Org mailing list - type3 at vwtype3.org To unsubscribe or
>>>> change subscription options, visit:
>>>> http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
>>>> If you need more help, contact: gregm at vwtype3.org
>>>>
>>>>
>>>> -----
>>>> No virus found in this message.
>>>> Checked by AVG - www.avg.com
>>>> Version: 2015.0.6140 / Virus Database: 4419/10667 - Release Date:
>>> 09/19/15
>>>
>>>
>>> --
>>> *******************************
>>> Jim Adney, jadney at vwtype3.org
>>> Madison, Wisconsin, USA
>>> *******************************
>>>
>>> _______________________________________________
>>> VWType3.Org mailing list - type3 at vwtype3.org To unsubscribe or change
>>> subscription options, visit:
>>> http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
>>> If you need more help, contact: gregm at vwtype3.org
>> -------------- next part --------------
>> An HTML attachment was scrubbed...
>> URL: <
>> http://lists.vwtype3.org/pipermail/type3-vwtype3.org/attachments/20150919/f44de408/attachment.htm
>> _______________________________________________
>> VWType3.Org mailing list - type3 at vwtype3.org To unsubscribe or change
>> subscription options, visit:
>> http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
>> If you need more help, contact: gregm at vwtype3.org
>> _______________________________________________
>> VWType3.Org mailing list - type3 at vwtype3.org
>> To unsubscribe or change subscription options, visit:
>> http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
>> If you need more help, contact: gregm at vwtype3.org
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://lists.vwtype3.org/pipermail/type3-vwtype3.org/attachments/20150919/7b6cb57b/attachment.htm>
>
> ------------------------------
>
> Message: 9
> Date: Sun, 20 Sep 2015 02:36:30 +0000
> From: "Daniel K. Du Vall" <dduvall at 1peter4-10.org>
> To: "type3 at vwtype3.org" <type3 at vwtype3.org>
> Subject: Re: [T3] Flywheel Question
> Message-ID:
> <BY2PR0501MB17194627148248FABBB9DF8093470 at BY2PR0501MB1719.namprd05.prod.outlook.com>
>
> Content-Type: text/plain; charset="us-ascii"
>
> Not all swing axel are 6V but I am not sure on the type 3 ones Jim or someone else will have to chime in on that one. Numbers always help.
>
> Daniel Du Vall
> http://1peter4-10.org
> http://volkswageninsanity.us
>
> -----Original Message-----
> From: type3-vwtype3.org [mailto:type3-vwtype3.org-bounces at lists.vwtype3.org] On Behalf Of Craigs List
> Sent: Saturday, September 19, 2015 9:30 PM
> To: Type 3 List <type3 at vwtype3.org>
> Subject: Re: [T3] Flywheel Question
>
> It does have a freeway flyer, but I think it was rebuilt by someone local to the Killeen area. I really have no history on the transmission other than partial information and guessing.
>
> If I get the numbers off the transmission tomorrow, could that help us figure out of it is already a later tranny? Or were all swing axle transmissions 6v? It is time for me to learn something tonight.
>
> Adam
>> On Sep 19, 2015 9:26 PM, "Daniel K. Du Vall" <dduvall at 1peter4-10.org> wrote:
>>
>> Did you mention that it had a freeway flyer trans in it?
>> If so it might already have clearance for a 12v flywheel.
>> But I am just guessing.
>> It's been a long while since I have seen a 6V trans and I do remember
>> them machining out the bell housing to fit 12V in them but the freeway
>> flyer might have started out as a 12v trans.
>>
>> Daniel Du Vall
>> http://1peter4-10.org
>> http://volkswageninsanity.us
>>
>> -----Original Message-----
>> From: type3-vwtype3.org [mailto:
>> type3-vwtype3.org-bounces at lists.vwtype3.org] On Behalf Of Craigs List
>> Sent: Saturday, September 19, 2015 9:12 PM
>> To: Type 3 List <type3 at vwtype3.org>
>> Subject: Re: [T3] Flywheel Question
>>
>> I already found a 12v starter. Now if I can get some pointers on the
>> clearancing, I'll be set.
>>
>> Adam
>>> On Sep 19, 2015 8:42 PM, "Jim Adney" <jadney at vwtype3.org> wrote:
>>>
>>> The 12 V flywheel is slightly larger in diameter. It also has a
>>> completely different number of teeth. It requires a different starter.
>>> The 12 V starter has a drive pinion with a different number of
>>> teeth; it also has a slightly different diameter armature shaft.
>>>
>>> The way the flywheels mount to the crank also varies. Sometimes they
>>> can be interchanged, but it's not a good option, since it's not a
>>> very good match.
>>>
>>>> On 19 Sep 2015 at 19:26, Craigs List wrote:
>>>>
>>>> Looks like the flywheel that came on my rebuilt long block is 1/8"
>>>> bigger than the one that was on it. Is that 12v flywheel vs. 6v
>>>> flywheel difference?
>>>>
>>>> One on the old engine is marked 6v and measures 10 3/4". One on
>>>> the
>>> engine
>>>> measures 10 7/8".
>>>>
>>>> Should I swap flywheels? Is there room for 1/8"? What about the
>> starter?
>>>> Will it work with either or will I need a different starter to go
>>>> with
>>> the
>>>> bigger flywheel?
>>>>
>>>> Added some pictures top my samba gallery for those interested.
>>> http://www.thesamba.com/vw/forum/album_search.php?search_author=one4
>>> ho
>>> use
>>>>
>>>> Adam
>>>> -------------- next part -------------- An HTML attachment was
>>>> scrubbed...
>>>> URL: <
>>> http://lists.vwtype3.org/pipermail/type3-vwtype3.org/attachments/201
>>> 50
>>> 919/752ef5a8/attachment.htm
>>>>
>>>> _______________________________________________
>>>> VWType3.Org mailing list - type3 at vwtype3.org To unsubscribe or
>>>> change subscription options, visit:
>>>> http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
>>>> If you need more help, contact: gregm at vwtype3.org
>>>>
>>>>
>>>> -----
>>>> No virus found in this message.
>>>> Checked by AVG - www.avg.com
>>>> Version: 2015.0.6140 / Virus Database: 4419/10667 - Release Date:
>>> 09/19/15
>>>
>>>
>>> --
>>> *******************************
>>> Jim Adney, jadney at vwtype3.org
>>> Madison, Wisconsin, USA
>>> *******************************
>>>
>>> _______________________________________________
>>> VWType3.Org mailing list - type3 at vwtype3.org To unsubscribe or
>>> change subscription options, visit:
>>> http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
>>> If you need more help, contact: gregm at vwtype3.org
>> -------------- next part -------------- An HTML attachment was
>> scrubbed...
>> URL: <
>> http://lists.vwtype3.org/pipermail/type3-vwtype3.org/attachments/20150
>> 919/f44de408/attachment.htm
>> _______________________________________________
>> VWType3.Org mailing list - type3 at vwtype3.org To unsubscribe or change
>> subscription options, visit:
>> http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
>> If you need more help, contact: gregm at vwtype3.org
>> _______________________________________________
>> VWType3.Org mailing list - type3 at vwtype3.org To unsubscribe or change
>> subscription options, visit:
>> http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
>> If you need more help, contact: gregm at vwtype3.org
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://lists.vwtype3.org/pipermail/type3-vwtype3.org/attachments/20150919/7b6cb57b/attachment.htm>
> _______________________________________________
> VWType3.Org mailing list - type3 at vwtype3.org To unsubscribe or change subscription options, visit:
> http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
> If you need more help, contact: gregm at vwtype3.org
>
>
> ------------------------------
>
> Subject: Digest Footer
>
> _______________________________________________
> VWType3.Org mailing list - type3 at vwtype3.org
> To unsubscribe or change subscription options, visit:
> http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
> If you need more help, contact: gregm at vwtype3.org
>
>
> ------------------------------
>
> End of type3-vwtype3.org Digest, Vol 60, Issue 21
> *************************************************
More information about the type3-vwtype3.org
mailing list