[T3] Alignment

[dlstiefel]

Finally figured out how to to program the alignment machine at the tech 
school to do cars made before 1983. Looks like the camber is a little 
off on the left front and the right rear also the toe on the left rear. 
Here is the screen on the alignment machine in this photo.

https://www.facebook.com/photo.php?fbid=10208044779453520&set=a.1294729764569.2038351.1120060951&type=3&theater

Is there a way to adjust the camber on the rear? I found in the Bentley 
how to adjust the toe on the rear and the camber on the front but looks 
like there is no adjustment for rear camber. May have to swap out the 
trailing arm or the bushing the trailing arm pivots on. Any other 
suggestions would be helpful. Now if anyone has an alignment issue or 
any other thing that requires other shop equipment at the school during 
the 2018 invasion they are more than welcome to use it.
-- 
Dennis Stiefel
72 Fastback FI MT
Rainsville, AL