[T3] Alignment
dlstiefel
dlstiefel at dekalbk12.org
Sat Nov 19 05:25:29 PST 2016
Finally figured out how to to program the alignment machine at the tech
school to do cars made before 1983. Looks like the camber is a little
off on the left front and the right rear also the toe on the left rear.
Here is the screen on the alignment machine in this photo.
https://www.facebook.com/photo.php?fbid=10208044779453520&set=a.1294729764569.2038351.1120060951&type=3&theater
Is there a way to adjust the camber on the rear? I found in the Bentley
how to adjust the toe on the rear and the camber on the front but looks
like there is no adjustment for rear camber. May have to swap out the
trailing arm or the bushing the trailing arm pivots on. Any other
suggestions would be helpful. Now if anyone has an alignment issue or
any other thing that requires other shop equipment at the school during
the 2018 invasion they are more than welcome to use it.
--
Dennis Stiefel
72 Fastback FI MT
Rainsville, AL
More information about the type3-vwtype3.org
mailing list