[T3] I tried seaching on Samba on the subject of engine oil .
William J
catnine09 at dslextreme.com
Mon Oct 16 19:56:41 PDT 2017
----- Original Message -----
From: "William J" <catnine09 at dslextreme.com>
To: <type3 at vwtype3.org>
Sent: Monday, October 16, 2017 7:27 PM
Subject: Re: [T3] I tried seaching on Samba on the subject of engine oil .
>I broke it in on 40 weight Kedall before it changed into something else .
>Used to get an oil light flicker at idle on hot runs. That was with the
>original 73 engine not this one.
> From what I can find in conventional oils Valvoline 10/40 at least states
> there is zinc on their site Castrol 20/50 GTX does not list it at all.
>
> To get anything else there is lucas at autozone. $20 pint. If I go by my
> VDO pressure gauge it reads higher than 10 PSI per 1000 RPM. I can't say
> it's very accurate.
>
> Thought next change I would try the Valvoline 10/40 and see what that
> offers. I imagine it's at least as good as if not better than Castrol GTX.
> ----- Original Message -----
> From: <Bobsnotch at aol.com>
> To: <type3 at vwtype3.org>
> Sent: Monday, October 16, 2017 5:34 PM
> Subject: Re: [T3] I tried seaching on Samba on the subject of engine oil .
>
>
>> In a message dated 10/16/2017 1:15:25 A.M. Eastern Daylight Time,
>> catnine09 at dslextreme.com writes:
>>
>> Now since I chose all by my self to get caught up in this thought
>> process
>> , can't say I need the zinc content required for flat tappet lifters ,
>> not
>> sure ,seems to run the same as it has pep wise and I hear no bearing
>> noise.
>> Actually you do need to worry about it, because the oil companies took
>> it
>> out of the oil starting around 2000. Without the ZDDP (zinc) you're
>> wearing
>> the lobes off the cam. It won't wear or cause wear to the engine
>> bearings,
>> but it will cause wear metal to metal contact surfaces.
>>
>> At this point since you broke the engine in with 20W50, I'd keep using
>> it,
>> although I'd look for an oil WITH ZDDP in it. Your other option is to
>> add
>> the ZDDP to the oil. You can add Lucas, or go with something else like
>> GM's
>> EOS (Engine Oil Supplement). I use EOS, and it's not cheap at 30 bucks
>> for
>> a small pint container (I add a 1/2 pint with every oil change), but it
>> beats taking out the engine, and tearing it down to replace the
>> camshaft. I
>> think of it as cheap insurance. I've put about 12K on it in 10 years of
>> summer only driving, and that includes some hard miles in the middle of
>> summer
>> going to and from a Type 3 Invasion.
>>
>> The reason for the removal of zinc (ZDDP) was it clogged catalytic
>> converters, and manufacturers switched to roller cams and away from "flat
>> tappet"
>> cams. This is what the GM dealer told me, and can be found researching
>> oils, so it's not just something I'm pulling out of my butt. :-)
>>
>>
>> Bob 65 Notch w/Factory Sunroof converted to IRS
>> -------------- next part --------------
>> An HTML attachment was scrubbed...
>> URL:
>> <http://lists.vwtype3.org/pipermail/type3-vwtype3.org/attachments/20171016/ef4884f7/attachment.html>
>> _______________________________________________
>> VWType3.Org mailing list - type3 at vwtype3.org
>> To unsubscribe or change subscription options, visit:
>> http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
>> If you need more help, contact: gregm at vwtype3.org
>>
>
>
> ---
> This email has been checked for viruses by Avast antivirus software.
> https://www.avast.com/antivirus
>
>
> _______________________________________________
> VWType3.Org mailing list - type3 at vwtype3.org
> To unsubscribe or change subscription options, visit:
> http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
> If you need more help, contact: gregm at vwtype3.org
>
More information about the type3-vwtype3.org
mailing list