[T3] Fuel Primer Switch.....

[Keith Park]

Your pressure regulator is no longer holding pressure,
replace it and the problem goes away, however... there is no way to know 
if the replacement is good till you get it on there and adjusted.

Jim's kits are an easy workaround for this.

Keith


Topnotch Restorations
topnotch at nycap.rr.com
http://www.topnotchresto.com
71 Squareback  “Hothe”
65 Notchback  “El Baja Rojo”
93 RX7  “Redstur”
95 Chrysler Cirrus Lxi "Cirfogsalot"
"hanging out at the tail end of the bell
curve, and loving every minute of it!" 
-----Original Message-----
From: type3-vwtype3.org [mailto:type3-vwtype3.org-bounces at lists.vwtype3.org]
On Behalf Of J. Jonik
Sent: Tuesday, September 25, 2018 1:34 AM
To: type3-vwtype3.org at lists.vwtype3.org
Subject: Re: [T3] Fuel Primer Switch.....

 Why doesn't turning on the key multiple times, not to point of ignition,
prime the fuel system?  Car starts on almost first, and a half, try when
doing that.   Then, what's wrong that it NEEDS special priming tricks, or
primer switches?Is there an old, worn out, or dirty Primer Switch somewhere
that ought be replaced, or cleaned?