[T3] Solex Dual Port Carb Gasket

[bobsnotch at aol.com]

Jeff, you should use a paper type gasket in those locations. I believe
CB Performance sells them. Just so you know, the gasket fits both 
Solex 32 PDSIT and Weber ICT carbs (same bolt pattern).
I hope this helps.
Bob


-----Original Message-----
From: Jeff C <knowonelse at gmail.com>
To: type3-vwtype3.org <type3-vwtype3.org at lists.vwtype3.org>
Sent: Tue, Sep 18, 2018 9:45 pm
Subject: [T3] Solex Dual Port Carb Gasket


This should have been an easy to find answer online, but there are so many
BUY THIS OTHER CARB instead results. Ugh.

I have the phenolic spacers for between the carbs and the manifolds.

What kind of gaskets go between the spacer and the manifold and between the
spacer and the carb?

I took them apart to check and tighten the manifold to head nuts looking
for vacuum leaks, and all four of the paper gaskets I had installed were
really wet. I found a set of thin metal ones with a ridge.

Jeff '67 Sqbk stock
Nevada City, CA
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.vwtype3.org/pipermail/type3-vwtype3.org/attachments/20180918/107b4bb5/attachment.html>
_______________________________________________
VWType3.Org mailing list - type3 at vwtype3.org
To unsubscribe or change subscription options, visit:
http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
If you need more help, contact: gregm at vwtype3.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.vwtype3.org/pipermail/type3-vwtype3.org/attachments/20180919/12f08bb9/attachment.html>