[T3] Late Model (dual bleeder) Caliper Assembly Bolt Question

[bobsnotch at aol.com]

Do both calipers have 42mm pistons? If mot, then they are Ghia calipers.
Bob


-----Original Message-----
From: Tim <OKType3Tim at cox.net>
To: type3-vwtype3.org <type3-vwtype3.org at lists.vwtype3.org>
Sent: Wed, Sep 18, 2019 4:59 pm
Subject: [T3] Late Model (dual bleeder) Caliper Assembly Bolt Question

I have 2 Calipers.  One uses socket cap screws.  The other uses hex head
bolts.  Both are 7mm x 1.0mm pitch.  Both are 12.9 strength spec.

 

https://www.thesamba.com/vw/forum/album_page.php?pic_id=1950425

 

Any insights on when the changeover was made?

Any insights on where to purchase new bolts/screws? (at a reasonable cost.)

 

Tim Shreve, OKType3Tim at cox.net <mailto:OKType3Tim at cox.net> 

Owasso, Oklahoma, USA

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.vwtype3.org/pipermail/type3-vwtype3.org/attachments/20190918/f0c6abdb/attachment.html>
_______________________________________________
VWType3.Org mailing list - type3 at vwtype3.org
To unsubscribe or change subscription options, visit:
http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
If you need more help, contact: gregm at vwtype3.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.vwtype3.org/pipermail/type3-vwtype3.org/attachments/20190918/979b6a87/attachment.html>