[T3] torsion arm needle bearings and machining Delrin bushings

bobsnotch at aol.com bobsnotch at aol.com
Tue Jul 14 07:41:49 PDT 2020


Yes, I think ISP even has reamer for adjusting the material of the bushings.
Bob 65 Notch S w/sunroof
 
 
 
-----Original Message-----
From: Keith Park <topnotch at nycap.rr.com>
To: type3 at vwtype3.org
Sent: Sun, Jul 12, 2020 3:23 pm
Subject: Re: [T3] torsion arm needle bearings and machining Delrin bushings

all those parts are readily available, try the Samba, I see them on there
regularly.

Keith


Topnotch Restorations
topnotch at nycap.rr.com
http://www.topnotchresto.com
71 Squareback  "Hothe"
65 Notchback  "El Baja Rojo"
93 RX7  "Redstur"
13 Subaru Outback "Blendin"
 
-----Original Message-----
From: type3-vwtype3.org [mailto:type3-vwtype3.org-bounces at lists.vwtype3.org]
On Behalf Of Jacob Wener
Sent: Sunday, July 12, 2020 12:14 PM
To: type3-vwtype3.org at lists.vwtype3.org
Subject: [T3] torsion arm needle bearings and machining Delrin bushings

Hello All, 

Just bought a 70 square back, and the drivers side upper torsion arm needle
bearing (and thrust ring) appear to have exploded into nothing long ago.
With no luck finding the bearings or thrust rings, or even an off the shelf
urethane bushing to replace them, I'm onto machining my own bushings out of
Delrin.  The debate is- do I just make a bushing to replace the outer needle
bearing and thrust ring, and leave the original inner bush in place (as it
appears to be ok) or should I machine a whole sleeve to replace everything?
Has anyone done these for a type 3 beam that could help provide some insight
as to what dimensions I should machine the bushings to? 

Thanks in advance. 

Jacob 
_______________________________________________
VWType3.Org mailing list - type3 at vwtype3.org
To unsubscribe or change subscription options, visit:
http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
If you need more help, contact: gregm at vwtype3.org

_______________________________________________
VWType3.Org mailing list - type3 at vwtype3.org
To unsubscribe or change subscription options, visit:
http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
If you need more help, contact: gregm at vwtype3.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.vwtype3.org/pipermail/type3-vwtype3.org/attachments/20200714/12ff9b2f/attachment.html>


More information about the type3-vwtype3.org mailing list