[T3] Injector hose

Daniel Keith Du Vall dduvall at 1peter4-10.org
Tue Jun 9 08:41:56 PDT 2020


Thanks Jim I might consider that. These are the injectors I bought from you a long while back. 

-----Original Message-----
From: type3-vwtype3.org <type3-vwtype3.org-bounces at lists.vwtype3.org> On Behalf Of Jim Adney
Sent: Tuesday, June 9, 2020 10:26 AM
To: type3 at vwtype3.org
Subject: Re: [T3] Injector hose

On 9 Jun 2020 at 13:26, Daniel Keith Du Vall wrote:

> What hose do y'all use to repair the little stub hose on the injectors?
> All 4 of mine need replaced. I started up mine and they are now 
> leaking profusely so I need to replace them.

I use US made 5/16" fuel hose. It does not have to be fuel injection hose because our systems run at lower pressure than modern FI systems.

Be careful when cutting off the old crimp ferrule. If you cut too deeply, you'll cut into the bulge on the end of the nipple. That can make it hard to seal.

I can replace those hoses for you for $5 each. I'm set up to do it carefully.

--
*******************************
Jim Adney, jadney at vwtype3.org
Madison, Wisconsin, USA
*******************************

_______________________________________________
VWType3.Org mailing list - type3 at vwtype3.org To unsubscribe or change subscription options, visit:
http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
If you need more help, contact: gregm at vwtype3.org


More information about the type3-vwtype3.org mailing list