[T3] FI Fuel Hose
Tim Schiller
schillertim at comcast.net
Mon Jul 5 13:17:21 PDT 2021
Does the 22’ include enough for the hoses at the fuel pump and tank (69 FB)?
Sent from my iPhone
> On Jul 5, 2021, at 9:54 AM, Jim Adney <jadney at vwtype3.org> wrote:
>
> The FI fuel hose I bought has arrived and I'm hoping to sell a bunch of it
> right away, since I had to buy a full 250' roll of it to get a decent price. Here's
> what it is:
>
> This is Parker Super-Flex FL, Barrier Fuel Line Hose, which meets both SAE
> J30R7 and J30R14T2 specs. It has a max. working pressure of 100 psi, with
> the new minimal gasoline permeation rate of 15 g/m²/day. (That would seem
> to indicate that it also meets SAE J30R9 specs.) It also has a minimum bend
> radius of 2", which is important for us and is the smallest I've ever seen for
> 5/16" hose. It has the right ID for our FI fittings and the OD is small enough,
> just barely, to pass thru the 3 places where our FI cars have rubber
> grommets.
>
> 5/16" is just under 8 mm, which makes it a good choice for the FI fittings on
> our cars, which are all 8 mm tubes. Most of those tubes end in a bulge or
> "bead", which insures a seal on 5/16" hose. Those fittings will seal with
> almost any kind of hose clamp behind the bead. The hose clamp is not part
> of the seal; that's all done by the bead, but the clamp is there to keep the
> hose from slipping off the fitting. DO NOT OVERTIGHTEN; that will just
> damage the hose.
>
> There are 4 places on our FI cars where the 8 mm tube does not have a
> beaded end. Those are the 4 ends of the 2 tubes that carry the fuel, supply
> and return, thru the pan/tunnel from the front to the rear of the car. Since
> there is no bead on those ends, those connections need a full circle clamp to
> assure a good seal. You can use the more expensive FI hose clamps from
> your FLAPS or I have plastic snap clamps for $0.75 each that seal full circle
> and have worked well for me. Worm gear clamps work sometimes, but only if
> you get the correct, very small size.
>
> I stock Oetiker ear clamps in the correct size for this hose for $0.25 each. I
> use these on about half of the hose ends in each car. These are not
> reusable, but they make for a neat installation. These are just like the OE
> VW ones except that mine are double ear. They must be tightened down
> with end or diagonal cutters, NOT pliers. I also use these on the injector
> ends of the short injector hoses.
>
> I have a nice pile of good used worm gear hose clamps if you need any of
> those, $1 each.
>
> I can sell this hose for $3/ft. 22' will do a complete FI car, front and rear, so
> I'll sell 22' for $60 plus $22 shipping. If you need hose clamps, I can add
> those. If your injectors still have the factory crimp ferrules on them, I can cut
> those off and replace their short hoses for $5 each. If you need this, it would
> be best to ship me your injectors first, so I can ship everything back in one
> box for the same $22.
>
> I have already sent individual messages to those of you who asked to buy
> hose. I didn't include any clamps in those quotes, but I can add anything you
> want to your order.
>
> thanks for reading!
>
> --
> *******************************
> Jim Adney, jadney at vwtype3.org
> Madison, Wisconsin, USA
> *******************************
>
> _______________________________________________
> VWType3.Org mailing list - type3 at vwtype3.org
> To unsubscribe or change subscription options, visit:
> http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
> If you need more help, contact: gregm at vwtype3.org
More information about the type3-vwtype3.org
mailing list