[T3] Push-rod length...

[Jim Adney]

On 29 Dec 2010 at 16:19, Bobsnotch at aol.com wrote:

> According to the Blue Bentley (61 to 67), there are 2 basic (starting  
> point) measurements. The first is for single circuit  master cylinders, and  
> it's 143.5+ - 5mm. The second basic measurement is 149.5mm + - .5mm.

I think we've been down this road before. It appears that someone 
made a mistake in the dimension, at least for the tandem MCs. I've 
never seen a published number that agreed with the untampered late 
pushrods that I've measured.  

The number I've recorded for my own use is 152-153 mm.

-- 
*******************************
Jim Adney, jadney at vwtype3.org
Madison, Wisconsin, USA
*******************************