[T3] Putting door seal on

[Bryon Garvin]

Thanks Bob.  The seal went on fine.  I just see light however when I close
the door and look down in there.  Further inspection leads me to think I
need to move the top door hinge in a tiny bit.  Its all so close.  Does this
sound reasonable?

- Bryon, '71 Fastback
On Jan 22, 2011 2:28 PM, <Bobsnotch at aol.com> wrote:
> In a message dated 1/22/2011 3:34:43 P.M. Eastern Standard Time,
> spinningrooves at gmail.com writes:
>
> Has anyone put the ISP USA-made door seals on? I'm trying to determine if
> I
> would use the white OE plastic clips that are on the forward part of the
> door. There are no holes in the new seal for them. Were there holes in
> the
> original seals or do you just punch them through?
>
> Also, the new seal is made of two pieces of rubber. They are joined
> together at seams that are more like corners.
> Would these "corners" go at the bottom of the door? That seems to be the
> spacing of them anyway.
>
> I'm prepping the door today and putting seal on tomorrow, the warmer of
the
> two days. Thanks....
>
> I haven't used them, but a couple of people in the Samba T-3 forum have.
> You'll probably have to put your own holes in, or set the seal over them
to
> "plug" the holes. The "molded" corners should go at the rear of the door
> (top and bottom), and let the rest follow the door frame. I hope this
helps.
>
>
>
> Bob 65 Notch S with sunroof and IRS (Krusty)
> 71 Notch (Krunchy)
> 64 T-34 Ghia (Wolfie)
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
http://lists.vwtype3.org/private.cgi/type3-vwtype3.org/attachments/20110122/04b9d71f/attachment.htm
>
> _______________________________________________
> VWType3.Org mailing list - type3 at vwtype3.org
> http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
> Contact gregm at vwtype3.org if you need help with the list.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.vwtype3.org/private.cgi/type3-vwtype3.org/attachments/20110123/c6867540/attachment.htm>