[T3] short distr cap

[crash 69]

Jim,

I've got the angled ones already and they work well.  Thanks.

On Mon, Jul 18, 2011 at 10:41 PM, Jim Adney <jadney at vwtype3.org> wrote:

> On 18 Jul 2011 at 18:05, crash 69 wrote:
>
> > Yes, I've read this in other forums as well.  Since I don't know the
> exact
> > displacement of my engine, how do I determine the best distributor
> option?
> >  We're guessing it's around 1915cc or so, based on how it drives.  I've
> gone
> > through the Weber 44 idf carbs and it runs very smoothly now, so I'm
> afraid
> > to change anything.  No flat spot, no hesitation and no hiccups.  Having
> > said that, I'm always open to improvements................
> >
> > I'm averaging about 22 mpg, which I think is reasonable for my situation.
>
> If it all seems to be working well now, then the only thing you might
> want to consider would be to make sure you have the right angle
> connectors for the SP wires to the top of the dist cap. Otherwise,
> the wires will stick up too far and wear thru the engine cover
> insulation, and eventually thru the SP wire insulation.
>
> --
> *******************************
> Jim Adney, jadney at vwtype3.org
> Madison, Wisconsin, USA
> *******************************
>
> _______________________________________________
> VWType3.Org mailing list - type3 at vwtype3.org
> http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
> Contact gregm at vwtype3.org if you need help with the list.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.vwtype3.org/private.cgi/type3-vwtype3.org/attachments/20110719/6625025b/attachment.htm>