[T3] Anybody located close to Delaware??

[Mike Fisher]

The 3 Ton jack stands really don't go quite high enough.  The bigger 6
Ton might be a better choice?

On Wed, Jun 1, 2011 at 5:12 AM, Mike Fisher <fisherfarms at gmail.com> wrote:
> We bought a 3 Ton hi/lo floor jack with the threaded pedestal & 3 Ton
> jack stands from Harbor Freight.  We put a 12'X12" square of heavy
> plywood between the pedestal and the engine.  Put the jack stands
> under the forward spring plates in front of the rear wheels at their
> highest notch.  Unbolt/lower/slide the engine onto heavy cardboard to
> drag it out from under the rear.  I've heard you can take a wheel off
> and slide it out the side easier?  An engine stand would be handy for
> detailing your engine also.  You & a buddy or neighbor kid can do it!
>> _______________________________________________
>> VWType3.Org mailing list - type3 at vwtype3.org
>> http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
>> Contact gregm at vwtype3.org if you need help with the list.
>>
>
>
>
> --
> http://s169.photobucket.com/albums/u236/mr_bojangles500/
>



-- 
http://s169.photobucket.com/albums/u236/mr_bojangles500/