[T3] Cylinder Performance

[Jim Adney]

On 22 Jun 2011 at 10:33, Adriel Rowley wrote:

> > From: jadney at vwtype3.org

> > > "Connect your VOM across the 2nd and 3rd pin of the TVS. Slowly open
> > > the throttle. You should see the VOM change from high to low
> > > resistance several times as the throttle opens but NOT as it closes.
> > > Repeat this test with the VOM connected to the 2nd and 4th pin."
> > >
> > > I got this to some degree, but no not recall for sure that I got 0
> > > ohms when closing.
> >
> > You are not supposed to see the zero ohms when closing. That's what
> > the word "not" means in the instructions above.
> >
> I DO NOT SEE A STATEMENT "NOT TO SEE 0 OHMS", BUT THANK YOU FOR 
> CLARIFYING THAT I SHOULD NOT.

To clarify, I have capitolized the word NOT in the paragraph above.

At this point I am bowing out of this discussion. Perhaps someone 
else can make these points more clearly, but my best efforts have 
clearly failed.

-- 
*******************************
Jim Adney, jadney at vwtype3.org
Madison, Wisconsin, USA
*******************************