[T3] Parting out front axle and rear subframe!

[Keith Park]

The bearings come out with the proper puller and slide hammer, or cut off
the guide tube and pound them thru.  The bushings come loose after you make
a cut thru the guide tube, as I remember the bushings are pressed into
Bakelite bushings and you can get them ALL out by carefully cutting them out
of the tube.

Keith


Top Notch Restorations
topnotch at nycap.rr.com
http://www.a383ina68.addr.com/radiorest/main.htm
71 Squareback "Hothe"
65 Notchback "El Baja Rojo"
65 Squareback "Eggcrate"
87 golf "Winterat"
93 RX7 "Redstur"



-------------- next part --------------
A non-text attachment was scrubbed...
Name: winmail.dat
Type: application/ms-tnef
Size: 3902 bytes
Desc: not available
URL: <http://lists.vwtype3.org/private.cgi/type3-vwtype3.org/attachments/20110908/7c3a3f1e/attachment.bin>