[T3] no start -- but just drove it!
Jim Adney
jadney at vwtype3.org
Sun Feb 12 10:38:08 PST 2012
On 12 Feb 2012 at 10:18, Bryon Garvin wrote:
> Now to find the reason the wire from ignition isn't getting 12v.
There are several possibilities. The irreplacable '71 ignition switch
is certainly a possibility, but there are others to check first.
Somewhere between the switch and the battery there is an inline
connector in that wire. It's under the carpet on the right side of
the hump. Find it and make sure it's connected securely. It probably
is.
There is a cable connector that plugs into the front (front is front)
of the ignition switch. Make sure none of the contacts in that
connector have backed out and are no longer making contact.
If it's the switch, I may be able to save it, but the '71 switch is
tricky to remove without damaging it further, so ask here first.
--
*******************************
Jim Adney, jadney at vwtype3.org
Madison, Wisconsin, USA
*******************************
More information about the type3-vwtype3.org
mailing list