[T3] trivial pursuit: the type 3 addition

[Brian Fye]

I actually had the answer.  John J had a bar to measure, I was just
curiouis if anyone else knew... Kind of a tribute to Russ ;)

On 2/12/12, Jim Adney <jadney at vwtype3.org> wrote:
> On 11 Feb 2012 at 12:06, Brian Fye wrote:
>
>> does anyone out there know the depth of the threaded hole at the end of
>> the
>> front torsion bar?  The bolt is 30mm, but what is the depth of the hole?
>
> The holes in the ends of the torsion bars are 19 mm deep, I just
> measured one, but they are probably not threaded all the way to the
> bottom. If you're trying to figure out how long a bolt to use, you'll
> also have to add mayby 5 mm for the thickness of the axle beam.
>
> --
> *******************************
> Jim Adney, jadney at vwtype3.org
> Madison, Wisconsin, USA
> *******************************
>
> _______________________________________________
> VWType3.Org mailing list - type3 at vwtype3.org
> http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
> Contact gregm at vwtype3.org if you need help with the list.
>


-- 
Brian Fye
Canyonville Christian Academy
541 839 4401 ext. 110