[T3] trivial pursuit: the type 3 addition

[Jim Adney]

On 11 Feb 2012 at 12:06, Brian Fye wrote:

> does anyone out there know the depth of the threaded hole at the end of the
> front torsion bar?  The bolt is 30mm, but what is the depth of the hole?

The holes in the ends of the torsion bars are 19 mm deep, I just 
measured one, but they are probably not threaded all the way to the 
bottom. If you're trying to figure out how long a bolt to use, you'll 
also have to add mayby 5 mm for the thickness of the axle beam.  

-- 
*******************************
Jim Adney, jadney at vwtype3.org
Madison, Wisconsin, USA
*******************************