[T3] Heater hose
rheorojo@F
rheorojo at frontier.com
Tue Nov 20 08:22:29 PST 2012
I have made the modification to get them to fit. The installation required me to lower the engine about 1.5 - 2 inches to line up the ends and then raise the engine back and secure it in place. I left the tyranny mount secured but loose, then tightened it also.
Tim
'73 FI Auto
On Nov 19, 2012, at 8:46 PM, Jim Adney wrote:
> On 19 Nov 2012 at 19:37, Brion Sabbatino wrote:
>
>> Has anyone used any of these to connect the heater box to the body
>> ducting? I have one correct metal house on the passenger side. The
>> other side I temporarily installed one of those thin aluminum ducts.
>> Cant see that lasting.
>>
>> http://www.airheadparts.com/vintage-vw-parts/heater-to-body-ducting
>
> 60/60 mm is the right diameter for us, but I don't think the beetle
> lengths will work for Type 3s. If one of these could be shortened to
> work for us that would be great news, as these parts are a problem in
> the Type 3 world.
>
> ISTR that someone on this list was going to try modifying one of
> these beetle parts to work, but I don't know how well that turned
> out.
>
> --
> *******************************
> Jim Adney, jadney at vwtype3.org
> Madison, Wisconsin, USA
> *******************************
>
> _______________________________________________
> VWType3.Org mailing list - type3 at vwtype3.org
> http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
> Contact gregm at vwtype3.org if you need help with the list.
More information about the type3-vwtype3.org
mailing list