[T3] New video

[Jim Adney]

On 14 Sep 2012 at 18:16, Dennis Stiefel wrote:

> >Enginewise, you're missing the black plastic cap that goes in the center of
> the pulley, and the bolt under there looks like it's one that came with an
> A/C kit. Those probably aren't really a big deal, but you're also >missing
> the "handle" that should stick out the back of the fan housing, that bolts
> the housing to the breather stand. 
>That one's important, just because it's the most robust connection holding
> the fan housing in place.

> Ok I thought They just removed it for the AC set up but if it's that
> important I can probably fabricate one to go there. 

You could just put an appropriate M8 x 1.25 bolt in there, maybe with 
a heavy washer, but that "handle" actually comes in handy when it's 
time to install the engine. I probably have all those parts here, but 
didn't you get at least one with your 2 engines?

> >I think you bought the overflow hose and vent kits from me some time ago.
> The vent kit makes that bracket superfluous, so I'd grind it off and paint
> it over, to seal it.
> 
> Yes I did get one but I was going to wait till after we get the gas tank
> back on before we install your kit. But that should be soon.

You could certainly wait to install the kit, but I'd get rid of that 
bracket now, when it's easy to get to.

-- 
*******************************
Jim Adney, jadney at vwtype3.org
Madison, Wisconsin, USA
*******************************