[T3] distributor drive gear

[ken2k]

I wanted to replace by 009 distributor with a stock one and it appears to be off 180 degrees, ie at number 1 TDC the small "half" is lined up at 60 degrees.  and as a result I there is no room for  distributor with the vacumn advance. Can I remove the distributor drive gear at TDC  #1 and reinsert it at TDC #3 so that the larger half is aligned correctly at 60 degrees or should I just leave well enough alone? hope this makes sense. kk
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.vwtype3.org/pipermail/type3-vwtype3.org/attachments/20130412/5558e7c2/attachment.htm>