[T3] Huf Ignition Key & Cylinder
Bobsnotch at aol.com
Bobsnotch at aol.com
Wed Aug 21 14:13:42 PDT 2013
In a message dated 8/21/2013 1:09:38 P.M. Eastern Daylight Time,
gbforsmo at gmail.com writes:
>Note; you might have to send a lock assembly to make sure the steel
>key will work. I ran into that last spring, when I used a VW key guy out
of
>PA. The steel key didn't work, but the brass one did. He was working off
>the key code, when he made them. We're just using the brass one, and an
>original Huf key for the door locks.
Using two different keys is kinda unhandy, isn't it?
I wouldn't like to have to do that.
Well, the car was originally a 2 key car. VW did that up thru 65.
However, I'm using the original steel key on the door locks, and a brass
key for the ignition switch (my set), while Sue is using the brass keys for
both.
Bob 65 Notch S w/Sunroof and IRS aka Krusty
64 T-34 Ghia aka Wolfie
71 Square-vert under construction
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.vwtype3.org/pipermail/type3-vwtype3.org/attachments/20130821/4793e518/attachment.htm>
More information about the type3-vwtype3.org
mailing list