[T3] FI to injector wires

[Daniel K. Du Vall]

That's a great idea if I only lived near one that was not 1 hour+ away. The other problem is Colorado is a very dry state and most anything rubber I have found is rack hard by now.
But if I happen to be in the two areas here in Co I will stop in and look ;-) I sure miss having lots of Junkyards to pick from. Living in Arizona there were lots of them.

Daniel Du Vall
http://1peter4-10.org
http://volkswageninsanity.us


-----Original Message-----
From: type3-vwtype3.org-bounces at lists.vwtype3.org [mailto:type3-vwtype3.org-bounces at lists.vwtype3.org] On Behalf Of Bobsnotch at aol.com
Sent: Wednesday, February 06, 2013 8:21 AM
To: type3 at vwtype3.org
Subject: Re: [T3] FI to injector wires

In a message dated 2/5/2013 3:38:50 P.M. Eastern Standard Time, dduvall at 1peter4-10.org writes:
 
Does anyone have any creative ideas on what to use as an  alternative for the boots that cover the wire and connector to the  injectors?


Go to a  "pick N pull" (salvage yard) and look at water cooled VWs, along 
with Volvos,  and any other european cars. Most of these have Bosch FI 
systems in them, and  some still used the 2 wire boot on them (for cooling fan 
controls and the  like).  


Bob 65  Notch S w/Sunroof and IRS aka Krusty
64 T-34 Ghia aka Wolfie
71  Square-vert under  construction


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.vwtype3.org/pipermail/type3-vwtype3.org/attachments/20130206/1ba414b2/attachment.htm>
_______________________________________________
VWType3.Org mailing list - type3 at vwtype3.org
http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
Contact gregm at vwtype3.org if you need help with the list.