[T3] More FI questions
Bobsnotch at aol.com
Bobsnotch at aol.com
Sat Jan 19 03:59:26 PST 2013
In a message dated 1/18/2013 10:15:23 P.M. Eastern Standard Time,
dduvall at 1peter4-10.org writes:
OK figured I would throw this one out here also.
Anyone have a D-jet injector harness that they would be willing to part
with?
I am mostly interested in the Injector plug with possibly enough wire to
use to make my own harness to a relay/connection board I am building for the
MegaSquirt(r)
Have you tried Keith for the small injector wiring connectors? He has
some. Like Jim said, the white plastic pieces don't wear out. Since you're
wanting to go from the injector to the relay board, you might want to just get
the ends, that way you won't have any splices in your wiring. Someone on the
Samba said the small wire connectors (without the plastic) are available
thru NAPA, and a couple of other places too (I just can't remember where).
You could try putting up a WTB (Want To Buy) ad in the Samba classifieds
for the plastic pieces though. It might be worth a try.
Boots are available thru Auto Atlanta, but like Jim said, "pricey", due to
them being a Porsche part (Auto Atlanta sells Porsche parts). If you have
a "pick N pull" in your area, you might find the ends and boots on some of
the water cooled VWs, and on some Volvo's, as Bosch parts were used on
both. I hope this helps.
Bob 65 Notch S w/Sunroof and IRS aka Krusty
64 T-34 Ghia aka Wolfie
71 Square-vert under construction
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.vwtype3.org/pipermail/type3-vwtype3.org/attachments/20130119/823b367b/attachment.htm>
More information about the type3-vwtype3.org
mailing list