[T3] Looking for data sheets

[Jim Adney]

On 26 Jan 2013 at 18:59, Daniel K. Du Vall wrote:

> Looking for data sheets on these two sensors in order to input the information into Megasquirt .
> This is to create the calibration tables so what I am looking for is:
> 
> 3 different temperatures (along with a bias resistor value)
> 
> Air intake sensor vw 311 906 081 / bosch 0 280 130 006
> 
> And
> 
> Cylinder head temp sender vw 022 906 041 / bosch 0 280 130 012

The 3 temps and the resistance range at each temp are given in the 
Bentley. I believe the bias resistor that VW sometimes installed was 
500 ohms, but I've never seen one installed.

Don't worry about slightly different part numbers. The calibrations 
are all the same.

-- 
*******************************
Jim Adney, jadney at vwtype3.org
Madison, Wisconsin, USA
*******************************