[T3] Looking for data sheets
Max Welton
max_welton_2k at yahoo.com
Sat Jan 26 16:31:00 PST 2013
--- On Sat, 1/26/13, Keith Park <topnotch at nycap.rr.com> wrote:
> Well, after looking at a dozen or so
> used units that I have and a few new
> ones, after all these years the resistance curves are
> nowhere near the
> original calibration. With the stock system, this
> really isn't a problem
> but to get things just right you might need to add or remove
> resistance to
> the sensor. VW used the bias resistor that Jim
> mentioned but back when the
> cars were new this was seldom needed.
>
> Keith
Daniel, it seems to me you could find the data points yourself with an ohm-meter and a thermometer. IIRC, you just need three points.
Max Welton
http://www.maxwelton2k.net/
More information about the type3-vwtype3.org
mailing list