[T3] Opposite of Terri's problem

[Bobsnotch at aol.com]

In a message dated 11/19/2013 7:15:11 P.M. Eastern Standard Time,  
topnotch at nycap.rr.com writes:
 
I don't think there is a problem with the tips coming off,  
Problem is you cant get the idle jets that fit these anymore, you have  to
drill them out if you want them larger.


 
Actually Keith, I think you're thinking about a different set of  jets. 
Yes, these idle cut off jets come in at least 3 different sizes (g45,  g50, 
g55). The ones that were on my 64 Notch, were g45's, while the mechanical  ones 
I put in their place are g55. I haven't noticed any difference between  
them with the different fuels over the years either, and I haven't touched the  
jetting in the carbs during the entire time I've had these carbs (22 
years).  :O


Bob 65  Notch S w/Sunroof and IRS aka Krusty
64 T-34 Ghia aka Wolfie
71  Square-vert under  construction


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.vwtype3.org/pipermail/type3-vwtype3.org/attachments/20131119/16cc143b/attachment.htm>