[T3] FI hose and clamps
Bobsnotch at aol.com
Bobsnotch at aol.com
Thu May 25 18:16:13 PDT 2017
In a message dated 5/24/2017 7:22:27 P.M. Eastern Daylight Time,
kensue356 at cableone.net writes:
For fuel injection. What is the correct size hose? What kind and what size
hose clamps to buy? How many feet and how many FI hose clamps to buy and
where?
I got to do this right.
The correct size is 7.5mm, but nobody sells it. What everyone else is
using is 8mm or 5/16ths fuel injection hose. Yes, it's expensive as hell,
butit's compatible with ALL fuels, and lasts a very long time. You need 25 feet
of it (this includes doing the little injector hoses too) and 35 FI clamps.
You can get these at any good FLAPS (Friendly Local Auto Parts Store). If
you're looking to cheap out a little, and aren't worried about replacing the
hose more often, the you can use standard 5/16ths fuel hose. It'll be good
enough to handle the FI fuel pressure, and it'll live thru some of the
chemicals in today's fuels, but it'll need replacing every 3 to 5 years.
I hope this helps.
Bob 65 Notch w/Factory Sunroof converted to IRS
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.vwtype3.org/pipermail/type3-vwtype3.org/attachments/20170525/d1da566b/attachment.htm>
More information about the type3-vwtype3.org
mailing list