[T3] Nose too high.

David rdavid at rochester.rr.com
Wed Jun 19 19:49:31 PDT 2019

[[[For the front height, I suggest we measure to the bottom center of the
front axle beam.]]]

I measured about 8 1/8" here


[[[For the rear, how about measuring to the lowest point of the plate at the
outer end of the rear torsion bar housing.]]]

I measured 7 5/16" divers side and 7 7/16" on passenger side. This
difference is because I need to change the torsion arm rubber bushing on the
passenger side.


Again; this is with low mileage 165/80R15 tires on factory wheels.

Dave Pallo

'72 Square ~ Elwood

Fairport, New York



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.vwtype3.org/pipermail/type3-vwtype3.org/attachments/20190619/28b8a71f/attachment.html>

More information about the type3-vwtype3.org mailing list