[T3] 73 type 3 runner hose and intake gasket replacement?

[William Jahn]

I meant right side of IAD.

On Wed, May 8, 2019 at 10:15 AM William Jahn <willjahn975 at gmail.com> wrote:

> My Air temp sensor fits in the left side of the IAD not in the top of the
> case it's a 73 .
>
> William
>
> On Wed, May 8, 2019 at 6:39 AM Jim Adney <jadney at vwtype3.org> wrote:
>
>> On 7 May 2019 at 20:55, William Jahn wrote:
>>
>> >  I forgot to ask , the seal for the IAD temp sensor , I can't find a
>> seal
>> > specific to T-3 yet same decade Porsche T-4 engines had one. I am not
>> sure
>> > if mine ever had one yet I know I sealed it either with gasket material
>> or
>> > something didn't want a vacuum leak.
>>
>> There was a special paper seal that's hard to find. It's very similar to
>> the one
>> for the oil filler/dipstick tube. Best to reuse the old one if you have
>> one, or
>> make a new one. A poor seal there won't make a vacuum leak, just an oil
>> leak. There's no oil pressure under there, just oil splash.
>>
>> I've heard that some AT cases don't have the center hole thru to the
>> inside
>> of the case, but I've never seen a case without it. Either way, a gasket
>> for an
>> AT engine would be easy to make, since it would not need the center hole.
>>
>> --
>> *******************************
>> Jim Adney, jadney at vwtype3.org
>> Madison, Wisconsin, USA
>> *******************************
>>
>> _______________________________________________
>> VWType3.Org mailing list - type3 at vwtype3.org
>> To unsubscribe or change subscription options, visit:
>> http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
>> If you need more help, contact: gregm at vwtype3.org
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.vwtype3.org/pipermail/type3-vwtype3.org/attachments/20190508/5a48e5c7/attachment.html>