[T3] 73 type 3 runner hose and intake gasket replacement?

[William Jahn]

My Air temp sensor fits in the left side of the IAD not in the top of the
case it's a 73 .

William

On Wed, May 8, 2019 at 6:39 AM Jim Adney <jadney at vwtype3.org> wrote:

> On 7 May 2019 at 20:55, William Jahn wrote:
>
> >  I forgot to ask , the seal for the IAD temp sensor , I can't find a seal
> > specific to T-3 yet same decade Porsche T-4 engines had one. I am not
> sure
> > if mine ever had one yet I know I sealed it either with gasket material
> or
> > something didn't want a vacuum leak.
>
> There was a special paper seal that's hard to find. It's very similar to
> the one
> for the oil filler/dipstick tube. Best to reuse the old one if you have
> one, or
> make a new one. A poor seal there won't make a vacuum leak, just an oil
> leak. There's no oil pressure under there, just oil splash.
>
> I've heard that some AT cases don't have the center hole thru to the
> inside
> of the case, but I've never seen a case without it. Either way, a gasket
> for an
> AT engine would be easy to make, since it would not need the center hole.
>
> --
> *******************************
> Jim Adney, jadney at vwtype3.org
> Madison, Wisconsin, USA
> *******************************
>
> _______________________________________________
> VWType3.Org mailing list - type3 at vwtype3.org
> To unsubscribe or change subscription options, visit:
> http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
> If you need more help, contact: gregm at vwtype3.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.vwtype3.org/pipermail/type3-vwtype3.org/attachments/20190508/9cf5e24f/attachment.html>