[T3] Was Bosch plug wire question on coil wire .

Dave Hall dave at hallvw.clara.co.uk
Wed Jan 1 10:06:02 PST 2020


I got some Bus outer rubbers years ago.  They were available new back then. Handy to have now, and I even know where I've put them!
Dave
UK VW Type 3 and 4 Club.

-----Original Message-----
From: "bobsnotch at aol.com" <bobsnotch at aol.com>
Sent: ‎01/‎01/‎2020 17:51
To: "type3 at vwtype3.org" <type3 at vwtype3.org>
Subject: Re: [T3] Was Bosch plug wire question on coil wire .

I would love to see a reproduction of the outer window scraper. I've been using 
bus inners to rebuild the outers, it leaves something to be desired, as the 
lower leg of the seal is too short in my opinion. If it weren't for the price, I'd 
use 65 on bug window scrapers and trim, and just drill out the rivets and just 
use the rubber pieces. Those fit much better, and look better installed. If we 
could just get the rubber piece only (like the bus inners), that would be great.
Bob


-----Original Message-----
From: Jim Adney <jadney at vwtype3.org>
To: type3 <type3 at vwtype3.org>
Sent: Tue, Dec 31, 2019 4:55 pm
Subject: Re: [T3] Bosch plug wire question on coil wire .
 I wonder if outside door window scrapers could be done this way. Are there 
3D printer materials that are flexible?

What kind of scan are you talking about? It seems like it would need to be 
some sort of 3D scan, perhaps by laser.


-- 
*******************************
Jim Adney, jadney at vwtype3.org
Madison, Wisconsin, USA
*******************************

_______________________________________________
VWType3.Org mailing list - type3 at vwtype3.org
To unsubscribe or change subscription options, visit:
http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
If you need more help, contact: gregm at vwtype3.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.vwtype3.org/pipermail/type3-vwtype3.org/attachments/20200101/905e8774/attachment.html>
_______________________________________________
VWType3.Org mailing list - type3 at vwtype3.org
To unsubscribe or change subscription options, visit:
http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
If you need more help, contact: gregm at vwtype3.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.vwtype3.org/pipermail/type3-vwtype3.org/attachments/20200101/b861554d/attachment.html>


More information about the type3-vwtype3.org mailing list