[T3] Fuel

[Jim Adney]

On 6 Jun 2011 at 15:04, Adriel Rowley wrote:

> What should my next action be?

IIRC, your gas gauge problem is that it's blinking. I assume this 
also means the blinker relay is clicking all the time. If that's the 
case, here's what to look for:

Your flasher relay and TS switch are not the problem. They are 
probably fine.

You've changed the wiring so that the gauge cluster wire is getting 
its power thru the blinker relay. That's why they are blinking. Find 
the black wire that comes out of the gauge back plate, and follow it. 
It must be connected to something that is powered thru the blinker 
relay. That spot should get its power directly from the ign switch; 
it should come on steadily when the ign sw is ON and go off when the 
ign sw is OFF.

-- 
*******************************
Jim Adney, jadney at vwtype3.org
Madison, Wisconsin, USA
*******************************