[T3] Noise from the right side cylinder head.

[Alex Satala]

both rods are from vw engines but my dad had 2 of them and the parts got mixed 
up.
they could also be from 1300cc beetle engines (the short ones).
I will recheck the valve clearance also.
thanks




________________________________
From: Jim Adney <jadney at vwtype3.org>
To: type3 at vwtype3.org
Sent: Wed, June 22, 2011 5:02:17 PM
Subject: Re: [T3] Noise from the right side cylinder head.

On 22 Jun 2011 at 0:35, Alex Satala wrote:

> So there could be 2 problems , one being the rocker socket not getting oil or 
> oil not getting on the right side of the engine. I have some long stock 
>pushrods 
>
> (about 5 pieces so far, still searching...). Can i install long ones on the 
> right with no problems?
> Ill measure the long rods to see their length. The pushrods were not shortened 

> or anything.

VW only made one length, so that leaves us wondering where you got a 
2nd length. Until we figure out which of yours are the stock length 
we won't know what to suggest.

If there's a mismatch between the oil holes, you might not get oil 
anywhere up to the rockers; that's why I suggest you look for oil 
coming out there. If there's no oil, things are likely to be noisy 
there, because the oil fills up some of the clearances.

Did you recheck the valve clearances?

-- 
*******************************
Jim Adney, jadney at vwtype3.org
Madison, Wisconsin, USA
*******************************

_______________________________________________
VWType3.Org mailing list - type3 at vwtype3.org
http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
Contact gregm at vwtype3.org if you need help with the list.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.vwtype3.org/private.cgi/type3-vwtype3.org/attachments/20110622/c0885246/attachment.htm>