[T3] injector
Bobsnotch at aol.com
Bobsnotch at aol.com
Mon Jun 27 18:15:09 PDT 2011
In a message dated 6/27/2011 4:26:00 P.M. Eastern Daylight Time,
emailjohnmorgan at gmail.com writes:
What I really need is to replace the hose. I am assuming that I undo
the two, 10mm bolts, and the come out together, according
to my Muir book.
Can anyone offer any other advice?
Yes, take the two 10mm nuts off, then pull the 2 injectors as a pair. I use
a 1/4 drive ratchet, and a box-open 10mm wrench to get them off.
Then just cut the metal piece off the injector. I cut it on a curve/angle.
You can do it with a die grinder, or even a hack saw. I prefer power tools.
;^)
Bob 65 Notch S with sunroof and IRS (Krusty)
71 Notch (Krunchy)
64 T-34 Ghia (Wolfie)
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.vwtype3.org/private.cgi/type3-vwtype3.org/attachments/20110627/96a20313/attachment.htm>
More information about the type3-vwtype3.org
mailing list