[T3] Carb rebuilt video

[maroblll at coqui.net]

Thanks for the advice Bob!  Is re-bushing the shafts something that
requires precision equipment?  The bushings are not part of the rebuild
kit, are they?  On  a 5 point scale, where does it stand in terms of
difficulty where 5 can be pretty difficult for the average owner?

<-----Original Message----->

 	  	 From: Bobsnotch at aol.com [Bobsnotch at aol.com]
Sent: 8/1/2013 10:30:32 PM
To: type3 at vwtype3.org
Subject: Re: [T3] Carb rebuilt video 

In a message dated 8/1/2013 7:52:47 P.M. Eastern Daylight Time, 
maroblll at coqui.net writes: 

Hola all: 

Is there a video on how to rebuild a set 32 PDSIT carb (s) that you know
of? Otherwise I'll have to practice with what I have. Any additional 
hint or warnings are more than welcome. Mainly those based on 
experience rather than what "The Book" mentions. Thanks to all, 


Jose,the carb kits come with instructions that cover most of it. The 
throttle shafts should be bre-bushed, but that's something you have to
do prior 
to rebuilding. About the only advice I can give, is to re-use your
existing 
needle and seat valves, as the kits cause problems. 


Bob 65 Notch S w/Sunroof and IRS aka Krusty 
64 T-34 Ghia aka Wolfie 
71 Square-vert under construction 


-------------- next part -------------- 
An HTML attachment was scrubbed... 
URL:
<http://lists.vwtype3.org/pipermail/type3-vwtype3.org/attachments/201308
01/378f6cf3/attachment.htm> 
_______________________________________________ 
VWType3.Org mailing list - type3 at vwtype3.org 
http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org 
Contact gregm at vwtype3.org if you need help with the list. 
. 
	
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.vwtype3.org/pipermail/type3-vwtype3.org/attachments/20130802/3692774f/attachment.htm>