[T3] Dist trigger points?

[William Jahn]

When I rebuilt my  73 AH dist I used the Bosch dist cam lube for the
weights and the weight pivots. Since it's a sticky grease maybe I should
have used a different type. I didn't glob it on , just enough to lube them.
I didn't know since it said dist grease. I just thought since the dist
spins twice the engine speed it would not fly off and get all over
everything.

On Sun, Sep 11, 2022 at 10:45 PM <jadney at vwtype3.org> wrote:

> On 11 Sep 2022 at 17:57, Gary Forsmo wrote:
>
> > If a person was real careful to isolate the "rusty" area, would using a
> > "de-rusto" product like EvapoRust on a womans make-up swab (they are much
> > denser, and not like Q-tips) to carefully pinpoint the corrosion area
> .....
> > would that help clean things up?
>
> EvapoRust would probably be useful here. I'd just soak it over night,
> rinse in water, then in
> alcohol, and let dry. Then coat with something that will prevent further
> rust. For rust
> prevention I like LPS-3, but I'd like to experiment with Fluid Film, too.
> Whatever rust
> preventative you use, keep it off the point contacts.
>
> --
> *******************************
> Jim Adney, jadney at vwtype3.org
> Madison, Wisconsin, USA
> *******************************
>
> _______________________________________________
> VWType3.Org mailing list - type3 at vwtype3.org
> To unsubscribe or change subscription options, visit:
> http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
> If you need more help, contact: gregm at vwtype3.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.vwtype3.org/pipermail/type3-vwtype3.org/attachments/20220911/9611271b/attachment.htm>